UNIVERSITAS AIRLANGGA



Detail Article

The Indonesian Journal of Occupational Safety and Health

ISSN 2301-8046

Vol. 3 / No. 2 / Published : 2014-12

Order : 9, and page :201 - 211

Related with : Scholar   Yahoo!   Bing

Original Article :

Kelengkapan pemenuhan syarat operator ketel uap dengan upaya pengoperasian dan pemeliharaan di pt pupuk kaltim (studi pada operator di industri kimia)

Author :

  1. Maulana Rahman Syahputra*1
  2. M. Sulaksmono *2
  1. Mahasiswa Fakultas Kesehatan Masyarakat
  2. Dosen Fakultas Kesehatan Masyarakat

Abstract :

ABSTRACT Boiler is heavy equipment that can lead to accidents in the workplace. To reduce the work accident, then the suitability of operator compliance with the operation of such devices must be appropriate to the use of the boiler can be properly and safely. The purpose of the study was to complately the operator’s compliance boiler UU Uap 1930 in accordance with the operation and maintenance efforts boiler at PT. Pupuk Kalimantan Timur. This research is a descriptive observational  study. The population is all boiler operators in PT. Pupuk Kalimantan Timur, for the study sample using purposive sampling to obtain 50 operators Boler. The results of this study indicate that respondents who had the highest number of respondents who are older have a group of 28 people, most educational level was high school that is 32 people, longest service life is the operator with a new working period as many as 38 people and obtained lack sesuaiaan results obtained using the boiler because the company is a labor shortage that has the ability as a operator senior, operator training is often held, but to improve the quality of carrier junior operator to senior operator is rarely done. Advice for companies is a boiler operator senior propagated, so that at each different work shifts have 4 or more operator senior by providing training for operators of junior Should monthly reports for boiler operation are always in P2K3 report on the meeting to keep can be monitored if the boiler is still working properly or when an error occurs operation of the boiler can be caught early. Keywords: boiler, operator boiler, the operator’s compliance

Keyword :

boiler, operator boiler, the operator’s compliance,


References :

  1. Munafir, (2006). Dasar-Dasar Keselamatan dan Kesehatan Kerja. . Jakarta : Bumi Aksara
  2. Muzaham, (2009). Sosiologi Kesehatan. Jakarta : UI Press
  3. Notoatmodjo, Soekidjo, (2007). Pengantar Pendidikan dan Ilmu Perilaku Kesehatan.. Yogyakarta : Andi Offset
  4. PNK3, (2010). Himpunan Peraturan Perundang- undangan Keselamatan Kerja. Jakarta : Kementerian Tenaga Kerja dan Transmigrasi
  5. Ramli, Soehatman, (2009). Sistem Manajemen Keselamatan & Kesehatan Kerja OHSAS 18001. Jakarta : PT. Dian Rakyat
  6. Suma’mur, P.K, (2009). Higiene Perusahaan dan Kesehatan Kerja. Jakarta : PT. Toko Gunung Agung. Cetakan XII
  7. Syamsir, A.M, (2007). Pesawat-pesawat Konversi Energi I (Ketel Uap). Jakarta : Rajawali Pers
  8. Tarwaka, (2008). Keselamatan dan Kesehatan Kerja. Surakarta : Harapan Press




Archive Article

Cover Media Content

Volume : 3 / No. : 2 / Pub. : 2014-12
  1. Hubungan pemenuhan kebutuhan kalori kerja dengan produktivitas di pabrik sepatu
  2. Risk assessment kecelakaan kerja pada unit windin pt. kusumaputra santosa, karanganyar, jawa tengah
  3. Analisis hubungan faktor pekerjaan dengan stres kerja bidan di rumah sakit syamrabu bangkalan
  4. Risk assessment pada pekerjaan di bagian press cutting pt. x
  5. Analisis tingkat risiko muskuloskeletal disorders (msds) dengan the rapid upper limbs assessment (rula) dan karakteristik individu terhadap keluhan msds
  6. Risk assessment pada pekerja maintenance di pt x
  7. Analisis faktor karakteristik individu yang berhubungan dengan tindakan tidak aman pada tenaga kerja di perusahaan konstruksi baja
  8. Penerapan csms (contractor safety management system) sebagai upaya pencegahan kecelakaan kerja
  9. Kelengkapan pemenuhan syarat operator ketel uap dengan upaya pengoperasian dan pemeliharaan di pt pupuk kaltim (studi pada operator di industri kimia)
  10. Fault tree analysis (fta) pada bagian electric arc furnace di pt. x