UNIVERSITAS AIRLANGGA



Detail Article

The Indonesian Journal of Occupational Safety and Health

ISSN 2301-8046

Vol. 2 / No. 1 / Published : 2013-06

Order : 7, and page :52 - 60

Related with : Scholar   Yahoo!   Bing

Original Article :

Risk assessment pada pekerjaan welding confined space di bagian ship building pt dok dan perkapalan surabaya

Author :

  1. Dwi Sandi Bakhtiar*1
  2. M. Sulaksmono*2
  1. Mahasiswa Fakultas Kesehatan Masyarakat
  2. Dosen Fakultas Kesehatan Masyarakat

Abstract :

ABSTRACT Risk Assessment is an attempt to quantify the risk and determine whether the risk is acceptable or not. Sometimes welding should be done in confined spaces such as tanks, pressure vessels and so on. The purpose of this study was to analyze the risk assessment at the confined space welding work on the ship building in the PT Dock and Shipping Surabaya to see the danger, risk, control risk and residual risk. This observational design study with cross sectional approach. Methods of collecting data from primary and secondary data. Primary data were collected from field observation and interviews. While the secondary data were obtained from the data recorded in the company. Result of research got the highest danger is at the welding process in confined spaces. Existing risk control who has made was the substitution, engineering control, administrative and PPE (Personal Protective Equipment). Based on the risk assessment has been conducted found that overall, the risk of danger to the purely there were 39 high-risk category and 4 hazard with medium risk. At the residual risk, there are 4 high risk categories, 31 medium risk categories, 8 low risk categories. It can be concluded, that the control which is good enough but the accident that occurred due to unsafe behavior of workers. There needs to be strict monitoring from the HSE to control implementation in the field. In addition, it is necessary to Making Job Safety Analysis on the job that has a high risk and socialized to every employee.   Keywords: confined space, risk assessment, welding

Keyword :

confined space, risk assessment, welding,


References :

Siswanto.,(1989) Bahaya Las terhadap Kesehatan Jakarta : Balai Hiperkes dan Keselamatan Kerja

Siswanto. ,(1990) Confined Space. Jakarta : Balai Hiperkes dan Keselamatan Kerja.

Wiryosumarto. H.,(2010) Teknologi Pengelasan Logam. Bandung : Pradnya Paramita





Archive Article

Cover Media Content

Volume : 2 / No. : 1 / Pub. : 2013-06
  1. Hubungan Karakteristik Dengan Peningkatan Ambang Pendengaran Penerbang Di Balai Kesehatan Penerbangan Jakarta
  2. Analisis Risiko Hydrogen Recovery Unit (hru) Dan Prioritas Risiko Kegagalan Komponen Pipa Gas Hidrogen Di Pt Petrokimia
  3. Risk Management Pada Pekerja Gandola Paket Iii Proyek Pengembangan Bandara Internasional Ngurah Rai-bali (ppbib), Kso Adhi-wika
  4. Tingkat Pemenuhan Safety Inspection Menurut International Safety Rating System Di Bukit Tua Development Project Pt Pal Indonesia Persero Tahun 2013
  5. Evaluasi Pelaksanaan Behavior Based Safety Pada Program Stop Dalam Membentuk Perilaku Aman Tenaga Kerja Di Pt X Tahun 2013
  6. Risk Assessment Pekerjaan Pengelasan Pada Bagian Double Bottom Pembangunan Kapal Pt X Surabaya
  7. Risk Assessment Pada Pekerjaan Welding Confined Space Di Bagian Ship Building Pt Dok Dan Perkapalan Surabaya
  8. Faktor Yang Memengaruhi Keluhan Kelelahan Pada Teknisi Gigi Di Laboratorium Gigi Surabaya
  9. Hubungan Antara Faktor Pembentuk Budaya Keselamatan Kerja Dengan Safety Behavior Di Pt Dok Dan Perkapalan Surabaya Unit Hull Constraction
  10. Analisis Pencemaran Udara (so2), Keluhan Iritasi Tenggorokan Dan Keluhan Kesehatan Iritasi Mata Pada Pedagang Makanan Di Sekitar Terminal Joyoboyo Surabaya
  11. Efektivitas Sistem Pengolahan Limbah Cair Dan Keluhan Kesehatan Pada Petugas Ipal Di Rsud Dr.m.soewandhie Surabaya
  12. Gambaran Kualitas Udara Ambien Terminal Kaitannya Dengan Gangguan Fungsi Paru Pedagang Tetap Wanita Di Terminal Joyoboyo Surabaya

Information index.php/JIPK/tmp_tumb/K3