UNIVERSITAS AIRLANGGA



Detail Article

Kimia FST

ISSN -

Vol. 1 / No. 1 / Published : 2013-07

Related with : Scholar   Yahoo!   Bing

Original Article :

Pembuatan dan karakterisasi elektroda selektif berbasis karbon nanopori/molecularly imprinted polymer untuk analisis glukosa dalam madu

Author :

  1. Dr. Muji Harsini, M.Si.*1
  2. Dr. Ir. Suyanto M.Si*2
  3. Hayati Ika Puspitasari*3
  1. Dosen Departemen Kimia FST Unair
  2. Dosen Departemen Kimia FST Unair
  3. Mahasiswa

Abstract :

Preparation and characterization of selective electrodes based on nanoporous carbon/molecularly imprinted polymer (MIP) for glucose analysis in honey have been done. The purpose of the research is to know the optimum condition of electrodes based on nanoporous carbon/MIP and to know its electrodes performance. Molecularly imprinted polymer (MIP) was made by mixing glucose as template, methacrylic acid as monomer and ethylene glycol dimethacrylate as crosslinker with a rasio 1:4:12. The electrodes was made by mixing nanoporus carbon, MIP and paraffin with rasio 45:20:35. This research obtained optimum pH of glucose solution is 7,0-8,0, Nersnt factor is 27,8 mV/decade, range of measurement from concentration 10-6M until 10-2M. Limit detection of this electrodes is 6,17x10-7M. The selectivity coefficient of fructose and sucrose solution are 1,786x10-3 and 5,155x10-4 which means these solution doesn’t interference measurement. The accuration of this electrodes is 93,86% for concentration 10-2M and 132% for concentration 10-4M, coefficient of variation is 1,09% for concentration 10-2M and 2,26% for concentration 10-4M. The content of glucose in honey which measured using this electrode is 22,4% w/w.

Keyword :

glucose, molecularly imprinted polymer,


References :

1. Brüggemann,(2002) Molecularly Imprinted Materials-Receptors More Durable than Nature Can Provide Berlin : Springer-Verlag Heidelberg





Archive Article

Cover Media Content

Volume : 1 / No. : 1 / Pub. : 2013-07
  1. Pembuatan Dan Karakterisasi Bioplastik Dari Komposit Kitosan-pati Singkong-selulosa Diasetat Dari Serat Batang Pisang Kepok (musa Paradisiaca Normalis) Dengan Plasticizer Asam Stearat
  2. Sintesis Dan Karakterisasi Material Magnetik Berbasis Senyawa Kompleks Inti Ganda Besi(iii) Dengan 2,2-bipiridin Menggunakan Ligan Jembatan Oksalat
  3. Pemanfaatan Abu Bawah Batubara (bottom Ash) Teraktivasi Sebagai Adsorben Ion Logam Cd2+
  4. Impregnasi Zeolit Alam Dengan Tio2 Untuk Degradasi Jingga Metil Secara Fotokatalitik
  5. Pengembangan Sensor Kreatinin Melalui Modifikasi Elektroda Hanging Mercury Drop Dengan Molecularly Imprinted Polianilin
  6. Pembuatan Dan Karakterisasi Katalis Asam Fosfomolibdat Terimpregnasi Pada Bentonit Untuk Transformasi Anetol
  7. Pengaruh Basa Terhadap Sintesis Kaliksarena Dari Eugenol
  8. Pengaruh Enzim Lakase Pada Perlakuan Awal Amonium Hidroksida Dan Hidrogen Peroksida Dalam Produksi Bioetanol Dari Tongkol Jagung
  9. Pembuatan Dan Karakterisasi Elektroda Selektif Berbasis Karbon Nanopori/molecularly Imprinted Polymer Untuk Analisis Glukosa Dalam Madu
  10. Sensor Kimia Bentuk Stik Menggunakan Reagen Zn(cns)2 Untuk Mendeteks Rhodamin B Dalam Sampel Makanan